Cone Volume Calculator

Cone Volume Calculator: solve cone volume problems step-by-step. Clear formula, worked example, and FAQs included.

A 3D volume and surface area calculator handles the seven most common solid shapes: sphere, cylinder, cone, cube, rectangular prism, pyramid, and torus. For each shape it computes both volume and total surface area simultaneously, with unit conversion across cubic metres, cubic centimetres, litres, and cubic feet. This is more useful than a single-shape widget because most design, engineering, and everyday problems involve comparing multiple geometries — finding the most space-efficient container, checking that a tank holds enough liquid, or estimating material quantities for construction.

These formulas are rooted in classical geometry and are used across manufacturing (packaging design, mould volumes), civil engineering (earthwork, concrete volumes), fluid mechanics (tank capacities), and science education. The 2D area calculator handles flat shapes, while the unit converter can help you switch between capacity units once you have a volume figure.

Select the shape tab — Sphere, Cylinder, Cone, Cube, Rect Prism, Pyramid, or Torus.
Choose your preferred unit (mm, cm, m, in, ft) from the unit selector; all inputs and outputs use that unit consistently.
Enter the dimensions — the calculator labels each field clearly (radius, height, side length, etc.).
Volume and surface area appear instantly in a results table with conversions to cm³, litres, m³, and ft³ for volume, and cm², m², and ft² for surface area.
For prisms and cylinders, the calculator also shows lateral surface area separately from total surface area — useful when you need to paint the sides of a tank without counting the top and bottom.

3D geometry formulas

Sphere — Volume: (4/3)πr³ | Surface area: 4πr²

Cylinder — Volume: πr²h | Total SA: 2πr(r + h) | Lateral SA: 2πrh

Cone — Volume: (1/3)πr²h | Total SA: πr(r + l) where slant l = √(r² + h²) | Lateral SA: πrl

Cube — Volume: a³ | Surface area: 6a²

Rectangular prism — Volume: l × w × h | Total SA: 2(lw + lh + wh) | Space diagonal: √(l² + w² + h²)

Square pyramid — Volume: (1/3)a²h | Total SA: a² + 2a × slant where slant l = √((a/2)² + h²)

Torus — Volume: 2π²Rr² | Surface area: 4π²Rr (R = distance from torus centre to tube centre, r = tube radius)

Reading the volume and surface area results

Volume vs capacity

Volume measures the space a solid occupies; capacity (in litres) is how much liquid it holds. For a perfect container with infinitely thin walls, these are identical — 1 litre = 1,000 cm³ = 0.001 m³. In practice, tank walls reduce the usable interior. The calculator outputs both cubic units and litres to make this conversion step unnecessary.

Surface area determines how much material is needed to cover or construct the shape — paint for a storage vessel, sheet metal for a duct, concrete for a dome. The lateral-only surface area is given separately for cylinders, cones, and prisms so you can exclude the base(s) when calculating coating costs for open-top containers.

Math tips and best practices

For a sphere, a 10% increase in radius increases volume by ≈ 33% (∝ r³) but surface area by only ≈ 21% (∝ r²) — volume grows faster than surface, which is why large spherical tanks are more material-efficient per litre of capacity.
A cylinder with equal height and diameter (h = 2r) minimises surface area for a given volume, which is why many tin cans and industrial drums use roughly this proportion.
Compare the 2D area calculator if you only need the cross-sectional area of the base shape, not the full solid volume.
The torus result applies when the tube does not self-intersect (R > r). If R = r the torus degenerates to a horn torus; if R < r the formula no longer applies.

The Earth's volume is approximately 1.08 × 10²¹ m³ (treating it as a sphere of radius 6,371 km). Its surface area is about 5.1 × 10¹⁴ m² — 71% of which is ocean.
A standard 330 ml aluminium can has an internal diameter of 66 mm and internal height of about 97 mm, giving a cylindrical volume of 332 cm³ — within 1% of the nominal capacity, with the remainder allowing for a domed base and lid.
A pyramid has exactly one-third the volume of a prism with the same base and height — Cavalieri's principle, proven rigorously by Eudoxus around 370 BC.

Common mistakes to avoid

Using diameter instead of radius for spheres, cylinders, and cones — a very common entry error that quadruples the calculated volume.
Confusing total surface area with lateral surface area when estimating material needed for open-top or open-bottom containers.
Mixing units mid-calculation — all inputs must be in the same unit before applying the formulas; the calculator enforces this via its unit selector.
Assuming a rectangular prism volume equals the container capacity without accounting for wall thickness and base plate.

Volume and surface area calculations are geometrically exact for perfect mathematical shapes. Real physical objects deviate due to manufacturing tolerances, material thickness, and shape imperfections. Engineering and construction projects should incorporate appropriate safety factors and professional review.