Draught Proofing Calculator

Draught Proofing Calculator — measure your draught proofing impact. Evidence-based formula with reduction tips.

Draught-proofing planning estimates the cost of treating a measured door and window perimeter and scales a potential heating saving by the severity of the current leakage. The Draught Proofing calculator keeps the topic-specific quantities visible so the result can be checked rather than hiding the model behind a generic total.

Environmental and energy estimates are sensitive to the boundary, units, time period, location, data quality, and assumptions selected. Use measured activity, current tariffs, supplier specifications, and local information where available, and record the source and date beside any result that will be reused.

These pages are designed for comparison and planning. A result can help identify the next measurement, reduction, retrofit, procurement question, or professional review; it cannot certify an environmental claim, investment product, energy performance, or engineering design.

Keep unlike quantities separate. Carbon flows are not the same as carbon stocks, water depth is not a mass of material, a credit count is not proof of additionality, and a nominal equipment rating is not guaranteed output. The labels and formula are deliberately explicit about those distinctions.

Read the field labels and units for this topic before entering values.
Choose a consistent boundary and period, such as one product, one year, one catchment, or one household.
Replace the illustrative defaults with measured data, current supplier information, or a clearly labelled planning assumption.
Review the primary output together with every supporting result and test one changed assumption at a time.
Save the inputs, factor sources, currency basis, and checks needed before reporting or acting on the estimate.

Draught Proofing formula and assumptions

Indicative cost = perimeter × assumed UK cost per metre; annual saving = heating bill × draught saving rate × severity factor.

The calculator keeps each term visible so the direction and dimensions of the result can be audited. Convert quantities before substitution, keep intermediate precision, and round only the displayed result. For money, the shared currency display changes presentation while the entered reference assumptions remain explicit.

Inputs used here: door and window perimeter, annual heating bill, and current draught severity. If the real decision includes another stage, gas, material, water pathway, financial convention, or operating condition, add it rather than quietly treating this simplified boundary as complete.

A useful validation check changes one input at a time. More releases should not lower a carbon balance, greater efficiency should not increase fuel required for the same heat, and a larger volume, area, flow, or capacity should move the result in the direction stated by the formula.

For a defensible comparison, write down what is inside and outside the boundary before changing the defaults. A household energy result may exclude standing charges and capital cost; a life-cycle result may exclude a material stage; a finance result may depend on attribution and taxonomy rules. Those exclusions are part of the interpretation, not footnotes to be discovered after the number has been shared.

Where uncertainty is material, keep a small scenario table rather than choosing a single optimistic value. A conservative case, a central case, and a sensitivity case make it easier to identify which measurement or supplier question would most improve the decision.

Interpreting your draught proofing result

Use the result within its stated boundary

This is a low-disruption fabric scenario that can be compared with glazing and insulation. Airtightness, ventilation, combustion appliances, moisture, access, product durability, and the difference between draughts and general heat transmission should be checked in the property.

Do not report more precision than the inputs support. A rounded default factor can be useful for a first comparison but should not be presented as a measurement. When two scenarios are compared, keep the same units, period, boundary, currency basis, and treatment of exclusions so the difference has a defensible meaning.

If the output affects a regulated disclosure, public sustainability claim, financial decision, energy retrofit, installation, water abstraction, or safety-related choice, stop at this planning estimate and obtain the relevant qualified or independent review.

Ecology tips and best practices

Record the source, date, location, and unit basis for every factor that materially affects the result.
Prefer activity data and measured performance over spend, average, or nominal factors when the decision justifies the effort.
Run a low, central, and high scenario for uncertain rates, efficiencies, quality scores, or operating patterns.
Keep capital cost, operating cost, environmental impact, and legal or reporting status as separate questions.
Use the first related calculator, second related calculator, and third related calculator to test adjacent assumptions.

Annualising a small recurring quantity can make it material, but the multiplication does not make an uncertain factor more accurate.
Energy, carbon, water, money, and impact units should remain labelled through every intermediate step.
Comparability depends on a shared boundary and method as much as on the final number.

Common mistakes to avoid

Mixing monthly, annual, per-unit, and instantaneous values.
Using a generic factor, certificate, rating, or taxonomy label as if it were verified evidence.
Confusing energy with power, water depth with mass, or an impact index with a physical measurement.
Ignoring efficiency, losses, quality, degradation, seasonality, or the stage of the life cycle that the formula names.
Presenting a planning estimate as a regulated report, investment advice, product claim, grant guarantee, or professional design.

Do not block required ventilation or combustion-air paths based on a payback estimate. This calculator provides preliminary educational guidance only and does not constitute regulated environmental reporting, financial advice, an energy-performance certificate, an environmental product declaration, engineering design, or professional approval.